Hanjiu BMR series hydraulic motor can replace Eaton E158-1027-001
BMR introduction
BMR series motor replace EATON CHAR-LYNN S, T SERIES
Features:
- integral pay the stator adopts world advanced processing means, to ensure that the machine is small in size, high efficiency, high speed, long service life.
- shaft seal pressure is high, can be used in series, in parallel.
- structure design is advanced, the power density.
| Main Specifications: |
| Technical data for BMR with 25 and 1 in and 1 in splined and 28.56 tapered shaft: |
| Type | BMR
BMRS
36 | BMR
BMRS
50 | BMR
BMRS
80 | BMR
BMRS
100 | BMR
BMRS
125 | BMR
BMRS
160 | BMR
BMRS
200 | BMR
BMRS
250 | BMR
BMRS
315 | BMR
BMRS
375 | | Geometric displacement (cm3 /rev.) | 36 | 51.7 | 81.5 | 102 | 127.2 | 157.2 | 194.5 | 253.3 | 317.5 | 381.4 | | Max. speed (rpm) | cont. | 1085 | 960 | 750 | 600 | 475 | 378 | 310 | 240 | 190 | 155 | | int. | 1220 | 1150 | 940 | 750 | 600 | 475 | 385 | 300 | 240 | 190 | | Max. torque (N·m) | cont. | 72 | 100 | 195 | 240 | 300 | 360 | 360 | 390 | 390 | 365 | | int. | 83 | 126 | 220 | 280 | 340 | 430 | 440 | 490 | 535 | 495 | | peak | 105 | 165 | 270 | 320 | 370 | 460 | 560 | 640 | 650 | 680 | | Max. output (kW) | cont. | 8.5 | 9.5 | 12.5 | 13 | 12.5 | 12.5 | 10 | 7 | 6 | 5 | | int. | 9.8 | 11.2 | 15 | 15 | 14.5 | 14 | 13 | 9.5 | 9 | 8 | | Max. pressure drop (MPa) | cont. | 14 | 14 | 17.5 | 17.5 | 17.5 | 16.5 | 13 | 11 | 9 | 7 | | int. | 16.5 | 17.5 | 20 | 20 | 20 | 20 | 17.5 | 15 | 13 | 10 | | peak | 22.5 | 22.5 | 22.5 | 22.5 | 22.5 | 22.5 | 22.5 | 20 | 17.5 | 15 | | Max. flow (L/min) | cont. | 40 | 50 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | | int. | 45 | 60 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | | Weight (kg) | 6.5 | 6.7 | 6.9 | 7 | 7.3 | 7.6 | 8 | 8.5 | 9 | 9.5 | |
| Technical data for BMR with 31.75 and 32 shaft: |
| Type | BMR
BMRS
36 | BMR
BMRS
50 | BMR
BMRS
80 | BMR
BMRS
100 | BMR
BMRS
125 | BMR
BMRS
160 | BMR
BMRS
200 | BMR
BMRS
250 | BMR
BMRS
315 | BMR
BMRS
375 | | Geometric displacement (cm3 /rev.) | 36 | 51.7 | 81.5 | 102 | 127.2 | 157.2 | 194.5 | 253.3 | 317.5 | 381.4 | | Max. speed (rpm) | cont. | 1250 | 960 | 750 | 600 | 475 | 378 | 310 | 240 | 190 | 155 | | int. | 1520 | 1150 | 940 | 750 | 600 | 475 | 385 | 300 | 240 | 190 | | Max. torque (N·m) | cont. | 72 | 100 | 195 | 240 | 300 | 380 | 450 | 540 | 550 | 580 | | int. | 83 | 126 | 220 | 280 | 340 | 430 | 500 | 610 | 690 | 690 | | peak | 105 | 165 | 270 | 320 | 370 | 460 | 560 | 710 | 840 | 830 | | Max. output (kW) | cont. | 8.5 | 9.5 | 12.5 | 13 | 12.5 | 12.5 | 11 | 10 | 9 | 7.5 | | int. | 9.8 | 11.2 | 15 | 15 | 14.5 | 14 | 13 | 12 | 10 | 9 | | Max. pressure drop (MPa) | cont. | 14 | 14 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 13.5 | 11.5 | | int. | 16.5 | 17.5 | 20 | 20 | 20 | 20 | 20 | 20 | 17.5 | 15 | | peak | 22.5 | 22.5 | 22.5 | 22.5 | 22.5 | 22.5 | 22.5 | 22.5 | 21 | 17.5 | | Max. flow (L/min) | cont. | 45 | 50 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | | int. | 55 | 60 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | | Weight (kg) | | 6.5 | 6.7 | 6.9 | 7 | 7.3 | 7.6 | 8 | 8.5 | 9 | 9.5 | |
* Continuous pressure:Max.value of operating motor continuously.
* Intermittent pressure:Max.value of operating motor in 6 seconds per minute .
* Peak pressure:Max.value of operating motor in 0.6 second per minute. |
Model Crossing:
| MOTOR CROSS REFERENCE TABLE |
| |
HANJIU
HYDRAULIC | M+S
HYDRAULIC | EATON
CHAR LYNN | | ROSS
TRW | WHITE
CROSS | PARKER | SAM
BREVINI | BOSCH
RECROTH |
| BMM | MM MLHK | J SERIES | OMM | | | | BGM | MGX |
| BMP/BM1 | MP HP | H SERIES | OMP DH | MF MG | WP RS | TC TE TB | BG | MGP GXP |
| BMR/BM2 | MR HR MLHRW,RW | S,T SERIES W SERIES | OMR DS OMEW | MB | WR RE | TF | BR | MGR GMR |
| BMH/BM4 | MH MLHH HW HWF | | OMH | ME | RE | TG | | |
| BMS/BM5 | MS MSY MLHS | 2000 SERIES | OMS | ME | RE | TG | HPR | MGS GMS |
| BMT/BM6 | MT MLHT MTM | 6000 SERIES | OMT TMT | MJ | | | HT | MGT,GMT |
| BMV | MV MLHV | 10000 SERIES | OMV | | | | | MGV GMV
|
Shijiazhuang Hanjiu Technology Co.,Ltd
A hydraulic motor, which is an actuator of a hydraulic system, converts hydraulic pressure energy supplied by a hydraulic pump into the mechanical energy (torque and rotational speed) of its output shaft. Hydraulic motors, also known as oil motors, are mainly used in injection molding machinery, ships, hoists, construction machinery, construction machinery, coal mining machinery, mining machinery, metallurgical machinery, shipbuilding machinery, petrochemicals, and port machinery.
• Cone Splitter
• Excavator Splitter
• Drilling Machine
• Mining Equipment
• Geological exploration
- My factory specializes in designing and producing the motors and steering gear of any type, from large to small, from low to high, and so on. And can replace , Eaton, M+S series models. Products are widely used in engineering machinery, mining machinery, metallurgical machinery, petroleum machinery, agricultural machinery, injection molding machinery, fishery machinery, military engineering and other fields.
Please do not hesitate to contact us for further information, inquiries or orders.
Thank you for choosing 'Hanjiu' Hydraulics.
